Tag Archives: Hopper

pellet grill

Smoke N Hot Stainless Steel Wood Pellet Grill Smoker Pizza Oven – Digital Temperature Control System, All in One Outdoor Cooking Center (OCC), 1460 sq inch Cooking Area, Large 23 LBS Hopper

The look of an Italian pizza oven but so much more with 4 cooking racks and the enjoyment of wood-fired cooking at the push of a button. Our pellet Outdoor Cooking Center (OCC) were designed as outdoor kitchen appliances that not only perform as low-n-slow smokers but as high-temperature grills (600°F+ ) and convection ovens as well. This means that in addition to low-n-slow smoking, our pellet grill SEARS STEAK, BAKES BREAD, PIZZA, etc. and can basically do anything your indoor convection can do.

Product Features

  • Affordable Deluxe Stainless Steel Pellet Grill : Heavy Gauge #304 stainless steel dual-wall fabrication for the main body of the grill, and #430 stainless steel for the Combustion System.
  • All- In – One : Versatility Pellet Grill to Grill, Smoke, Bake, Roast, Sear, Braise & Pizza. Unique Tri-Burn combustion system, and Favor dome deflector
  • Featuring conventional cart styling with advanced combustion technology. Computerized Control Board system which accurately controls grill temperature from ‘low & slow’ smoking temperature of 180°f to a super hot searing temperature of 650°f
  • Foldable side shelves and Rear hopper design offer more working space. Premium Quality canvas WATER-PROOF COVER and Meat Temperature PROBE are included
  • 5 Years Warranty. Fully assembled (Except for minor chimney attachment

pellet grill

Z GRILLS 2020 Upgrate Wood Pellets Grill 1000 SQIN 20LB Hopper 8-in-1 Outdoor Smoker Grill (ZPG-10002B)

Z GRILLS: Enhance Your Grilling Experience, Greater Flavor, Easier to Operate
Z GRILLS Wood Pellet Grills are fueled by 100%-natural BBQ wood pellets. The digital control board ignites the grill and allows you to set the cooking temperature from 180°F to 450°F. Fan-forced convection cooking eliminates the need for a rotisserie and creates a versatile environment for grilling, roasting, smoking, braising and baking.

Pellet Grill and Smoker ZPG-10002B
1. Cooking Area: 432 square inch
2. Second& Third Cooking Rack: Standard, 374 square inch & 255 square inch
3. Cooking Temperature: 160°F to 450°F
4. BTU’s /hr: 25,000
5. Hopper Capacity:20 lbs
6. Internal Temperature Sensor: Yes
7. Electronic Auto Ignition: Yes
8. Shutdown Recycle Mode: Yes
side shelf:Yes
Front Shelf:Yes

WHY BUY A WOOD PELLET GRILL?

WOOD FIRE IS A BETTER COOKING SOLUTION THAN GAS & CHARCOAL GRILLS. HERE’S WHY:

1. TASTE: WOOD NATURALLY ENHANCES FLAVOR
2. VERSATILITY: 8-IN-1 GRILL, Grill, smoke, bake, roast, braise, barbeque,sear,char-grill
3. EASE: NO NEED TO BABYSIT, SET & FORGET IT
4. CONSISTENCY: COOK LIKE A PRO EVERY TIME
5. COMMUNITY: RECIPES AVAILABLE ON Z GRILLS SITE
6.Affordable gift choice in Grilling &Backyard

WHY CHOOSE Z GRILLS:

★PROUD AMERICAN BRAND
★HIGH QUALITY BUT AFFORDABLE PRICE
★33 YEARS PELLET SMOKER R & D and production(FACTORY)
★50 YEARS Stainless Steel production(FACTORY)
PACKAGE
1*ZPG-10002B PELLET SMOKER
1*GRILL COVER

Product Features

  • ▶️▶️LARGE GRILL AREA-3 Layers ,1060 sqin include 432 cooking area,374 warming area & 255 sqin warming area
  • ▶️▶️Precise temperature control-the digital control board auto ignites the grill and allows you to set the cooking temperature from 180°f to 450°f.
  • ▶️▶️8-in-1 versatility-grill smoke bake roast braise sear char-grill barbecue it also functions like an oven so it can bake foods like pizza, biscuits, and corn bread.
  • ▶️▶️Great smoke taste-Fueled by 100% natural wood pellets you will get a natural wood favor
  • ▶️▶️3YEARS WARRANTY – We GUARANTEE you that our grills are made from top quality materials. If you are not 100% Satisfied, we are not satisfied!

Click Here For More Information

pellet smoker

Direct Igniter 18″ Pellet Hopper KIT Build Your OWN Smoker BBQ

This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED :1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe, 1 Meat Sensor Probe, 1 200W Igniter, 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod,1 Combustion/Induction Fan EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. DESCRIPTION: Has auto start/ auto light 160-500 DEGREE RANGE Includes SMOKE MODE with P Setting P MODE Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Holds up to 20 Pounds of Pellets. Black powder coated steel construction. Has pellet dump on back for easy switching of pellet flavors. Includes Mounts for rolling up power cord on back. Works on 110/120 volt. Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 inch 5 inches ver5 inches vertically) Comes with Grommet Hinge Lid

Product Features

  • These units also work with many of the common pellet stoves… an easy way to fix your broken pellet smoker… This is also the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker.
  • Made of Black powder coated steel construction, Built to last-FULLY ASSEMBLED
  • Digital display with Meat probe sensor, Smoke Mode with P-SETTING, Pellet Dump, automatic shut down feature, & holds up to 20 LBS of pellets
  • Dimensions of Hopper Assembly Kit (31″ Long)X(18.75″ Tall)X(10″ Wide) Length from Mounting wall to center of burn pot is 18″
  • Insert Dimensions (Size of hole needed to insert assembly): Height: 4″ Width: Approximately 5.25″ Depth of Hopper Insertion into Desired Pit is Approximately: 18″ to center of fire pot.

pellet smoker

Direct Igniter 18″ Pellet Hopper Assembly KIT

This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED :1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe, 1 Meat Sensor Probe, 1 200W Igniter, 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod,1 Combustion/Induction Fan EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. DESCRIPTION: Has auto start/ auto light 160-500 DEGREE RANGE Includes SMOKE MODE with P Setting P MODE Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Holds up to 20 Pounds of Pellets. Black powder coated steel construction. Has pellet dump on back for easy switching of pellet flavors. Includes Mounts for rolling up power cord on back. Works on 110/120 volt. Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 inch 5 inches ver5 inches vertically) Comes with Grommet Hinge Lid

Product Features

  • These units also work with many of the common pellet stoves… an easy way to fix your broken pellet smoker… This is also the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker.
  • Made of Black powder coated steel construction, Built to last
  • Digital display with Meat probe sensor, Smoke Mode with P-SETTING, Pellet Dump, automatic shut down feature, & holds up to 20 LBS of pellets
  • Dimensions of Hopper Assembly Kit (31″ Long)X(18.75″ Tall)X(10″ Wide) Length from Mounting wall to center of burn pot is 18″
  • Insert Dimensions (Size of hole needed to insert assembly): Height: 4″ Width: Approximately 5.25″ Depth of Hopper Insertion into Desired Pit is Approximately: 18″ to center of fire pot.

pellet smoker

Direct Igniter Pellet Hopper KIT 12″ Pellet Smoker FIX/Build Your OWN Smoker

DIRECT IGNITER PELLET HOPPER 12 INCH This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED:1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe 1 Meat Sensor Probe 1 200W Igniter 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod 1 Combustion/Induction Fan 1 Instruction Manual EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. CONTROLLER DESCRIPTION: Has auto start/ auto light 200-550 in 5 degree increments. Includes SMOKE MODE with P Setting P Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Has ANTI OVER COOK FEATURE – This feature lets you set a desired meat probe temperature and when the meat probe reaches this temperature, it will put the stove into smoke mode to keep your food warm but will help prevent over cooking meal.

Product Features

  • BUILD YOUR OWN PELLET SMOKER OR FIX AN OLD ONE WITH THIS ALL IN ONE KIT 12″ AUGER ASSEMBLY FITS MANY PELLET STOVES INCLUDING TRAEGERS AND PITBOSS
  • Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 3/4″ vertically) Also comes with Grommet Hinged Lid System Over the Pellet Hopper to cover pellets.
  • Dimensions of Hopper Assembly Kit: 24 ¾” x 16 ¾” x 10″. Insert Dimensions (Size of hole needed to use): Height: 4″ Width: Approximately 5.5″ Depth of Hopper Insertion into Desired Pit is Approximately: 11.5″
  • 180 TO 600 DEGREES 36’000 BTU INCLUDES 1 MEAT PROBE
  • SMART CONTROLLER TECHNOLOGY / 1 YEAR NO HASSLE WARRANTY