This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED :1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe, 1 Meat Sensor Probe, 1 200W Igniter, 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod,1 Combustion/Induction Fan EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. DESCRIPTION: Has auto start/ auto light 160-500 DEGREE RANGE Includes SMOKE MODE with P Setting P MODE Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Holds up to 20 Pounds of Pellets. Black powder coated steel construction. Has pellet dump on back for easy switching of pellet flavors. Includes Mounts for rolling up power cord on back. Works on 110/120 volt. Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 inch 5 inches ver5 inches vertically) Comes with Grommet Hinge Lid

Product Features

• These units also work with many of the common pellet stoves… an easy way to fix your broken pellet smoker… This is also the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker.
• Made of Black powder coated steel construction, Built to last-FULLY ASSEMBLED
• Digital display with Meat probe sensor, Smoke Mode with P-SETTING, Pellet Dump, automatic shut down feature, & holds up to 20 LBS of pellets
• Dimensions of Hopper Assembly Kit (31″ Long)X(18.75″ Tall)X(10″ Wide) Length from Mounting wall to center of burn pot is 18″
• Insert Dimensions (Size of hole needed to insert assembly): Height: 4″ Width: Approximately 5.25″ Depth of Hopper Insertion into Desired Pit is Approximately: 18″ to center of fire pot.