Tag Archives: Igniter

rec tec grill

Direct Igniter Digital Thermostat Controller for Pit BOSS Also Works for Traeger

3 Comments

STANDARD OEM REPLACEMENT, FITS PERFECT, EASILY CONNECTS ALSO INCLUDES P-SETTING ADJUSTMENT (WHICH CONTROLS TIMING ON SMOKE MODE) DIGITAL DISPLAY EASY INSTALL RTD PROBE INCLUDED SMOKE MODE HIGH MODE TEMP MODES-SMOKE,200,225,250,300,350,400,450,475 ON/OFF SWITCH HOLDS WITHIN +/-15 DEGREES F HIGH QUALITY COMPATIBLE WITH PIT BOSS WOOD PELLET GRILLS ITEM #70120 1 YEAR WARRANTY

Product Features

  • INCLUDES P SETTING AND 200 MODE!
  • ALSO WORKS ON ALL TRAEGER
  • EASY INSTALL MOLEX CONNECTORS
  • HIGHEST QUALITY ON THE MARKET

pellet smoker

Direct Igniter 18″ Pellet Hopper KIT Build Your OWN Smoker BBQ

This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED :1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe, 1 Meat Sensor Probe, 1 200W Igniter, 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod,1 Combustion/Induction Fan EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. DESCRIPTION: Has auto start/ auto light 160-500 DEGREE RANGE Includes SMOKE MODE with P Setting P MODE Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Holds up to 20 Pounds of Pellets. Black powder coated steel construction. Has pellet dump on back for easy switching of pellet flavors. Includes Mounts for rolling up power cord on back. Works on 110/120 volt. Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 inch 5 inches ver5 inches vertically) Comes with Grommet Hinge Lid

Product Features

  • These units also work with many of the common pellet stoves… an easy way to fix your broken pellet smoker… This is also the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker.
  • Made of Black powder coated steel construction, Built to last-FULLY ASSEMBLED
  • Digital display with Meat probe sensor, Smoke Mode with P-SETTING, Pellet Dump, automatic shut down feature, & holds up to 20 LBS of pellets
  • Dimensions of Hopper Assembly Kit (31″ Long)X(18.75″ Tall)X(10″ Wide) Length from Mounting wall to center of burn pot is 18″
  • Insert Dimensions (Size of hole needed to insert assembly): Height: 4″ Width: Approximately 5.25″ Depth of Hopper Insertion into Desired Pit is Approximately: 18″ to center of fire pot.

pellet smoker

Direct Igniter 18″ Pellet Hopper Assembly KIT

This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED :1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe, 1 Meat Sensor Probe, 1 200W Igniter, 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod,1 Combustion/Induction Fan EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. DESCRIPTION: Has auto start/ auto light 160-500 DEGREE RANGE Includes SMOKE MODE with P Setting P MODE Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Holds up to 20 Pounds of Pellets. Black powder coated steel construction. Has pellet dump on back for easy switching of pellet flavors. Includes Mounts for rolling up power cord on back. Works on 110/120 volt. Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 inch 5 inches ver5 inches vertically) Comes with Grommet Hinge Lid

Product Features

  • These units also work with many of the common pellet stoves… an easy way to fix your broken pellet smoker… This is also the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker.
  • Made of Black powder coated steel construction, Built to last
  • Digital display with Meat probe sensor, Smoke Mode with P-SETTING, Pellet Dump, automatic shut down feature, & holds up to 20 LBS of pellets
  • Dimensions of Hopper Assembly Kit (31″ Long)X(18.75″ Tall)X(10″ Wide) Length from Mounting wall to center of burn pot is 18″
  • Insert Dimensions (Size of hole needed to insert assembly): Height: 4″ Width: Approximately 5.25″ Depth of Hopper Insertion into Desired Pit is Approximately: 18″ to center of fire pot.

pellet smoker

Direct Igniter Pellet Hopper KIT 12″ Pellet Smoker FIX/Build Your OWN Smoker

DIRECT IGNITER PELLET HOPPER 12 INCH This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss… an easy way to fix your broken pellet smoker. WHATS INCLUDED:1 Pellet Hopper Body 1 Digital Control Board with meat temp sensor 1 RTD Sensor Probe 1 Meat Sensor Probe 1 200W Igniter 1 Steel Burn Pot 1 2RPM Auger Motor 1 Auger Shaft Rod 1 Combustion/Induction Fan 1 Instruction Manual EVERYTHING IS FULLY ASSEMBLED… JUST NEEDS TO BE ATTACHED TO YOUR SMOKER PIT AND RTD PROPERLY PLACED AND INSTALLED. *** RTD PROBE PLACEMENT – RTD MUST be placed in close proximity to grill grate for accurate readings. RTD SHOULD NOT BE LOCATED NEAR OR TOUCHING ANY DIRECT FLAME OR HIGH HEAT*** YOU MUST HAVE A FLAME GUARD AND DRIP TRAY IN YOUR SMOKER FOR PROPER OPERATION. THESE ARE NOT INCLUDED AND MUST BE MADE CUSTOM FOR YOUR PROJECT. Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results. CONTROLLER DESCRIPTION: Has auto start/ auto light 200-550 in 5 degree increments. Includes SMOKE MODE with P Setting P Settings are 1-7 Digital Display Displays ACTUAL TEMP & MEAT PROBE TEMP Has Automatic Shut Down Feature “which runs the fan motor for 5 minutes after shut down to blow out fire and ashes” Has ANTI OVER COOK FEATURE – This feature lets you set a desired meat probe temperature and when the meat probe reaches this temperature, it will put the stove into smoke mode to keep your food warm but will help prevent over cooking meal.

Product Features

  • BUILD YOUR OWN PELLET SMOKER OR FIX AN OLD ONE WITH THIS ALL IN ONE KIT 12″ AUGER ASSEMBLY FITS MANY PELLET STOVES INCLUDING TRAEGERS AND PITBOSS
  • Standard 4 Bolt Mounting Pattern (Approx 8 inches horizontally 5 3/4″ vertically) Also comes with Grommet Hinged Lid System Over the Pellet Hopper to cover pellets.
  • Dimensions of Hopper Assembly Kit: 24 ¾” x 16 ¾” x 10″. Insert Dimensions (Size of hole needed to use): Height: 4″ Width: Approximately 5.5″ Depth of Hopper Insertion into Desired Pit is Approximately: 11.5″
  • 180 TO 600 DEGREES 36’000 BTU INCLUDES 1 MEAT PROBE
  • SMART CONTROLLER TECHNOLOGY / 1 YEAR NO HASSLE WARRANTY

pellet grill

Dreld Grill Hot Rod Igniter Element Kit Waterproof, Replacement Part Fits for All Louisiana Wood Pellet Grills and Pellet Smokers LS-9.5127 120V 300W 215LL

2 Comments

Disclaimer:
>All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

Description:
>The Hot Rod Ignitor Kit perfectly replaces with to the OEM hot stick. Compatible with Pit Boss Wood Pellet Grills. When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively.

Features:
>Upgraded Replacement Hot Rod Ignitor Kit, Not Genuine but Exceeds OEM Standards.
>Maintains more consistent temperatures
>Design improved for more durability, Stable and updated characteristics, high reliability.
>Plug and Play Simple Installation.
>1-year manufacture warranty.

Specifications:
>Item: Hot Rod Ignitor Kit
>300 Watt /120 volt
>5″ (12.7cm) x 3/8″ high density cartridge heating element
>8″ (21.5cm) heat woven wire lead
>c/w Small Molex Quick Connector

Compatibility:
>Compatible with all Louisiana Wood Pellet Grills
>Installation Tips: For proper installation, only 1/8″-1/4″ inch should be showing in firepot

Note:
>Sometimes, burned hot rods can be difficult to remove. Often when there is swelling, cut off the end with diagonal pliers. Attaching wires to electrical connectors before disassembly also makes the process smoother. For best performance, only 1/8 “1/4” of the cable should be visible after cartridge replacement.

Package Included:
>1Pc x Hot Rod Ignitor Kit.

Product Features

  • > Compatible with all Louisiana grill mode (EXCEPT PTG). Note: Please check spade connector style before ordering. Light the hardwood and start your barbecue as easy as a flip switch, keep the fire on for a delicious taste with hardwood fuel.
  • > Strict quality control standards to Build and test. Not OEM but quality exceeds OEM requirements. Perfect match and Good Choice for Direct replacement of original parts, for proper installation, only 1/8-1/4 inch should be showing in firepot. Installation guide: https://youtu.be/HsbNKA1vgBA
  • > 300 Watt /120 volt,5″ (12.7cm) x 3/8″ high density cartridge heating element, 24″ (60cm) heat woven wire lead, c/w Small Molex Quick Connector, when your current hot rod shortens or burns, this replacement part will ensure that your grill continues to function effectively.
  • > Quickly ignite your wood and keep the fire on fire to ignite a quality barbecue. Your grill won’t work without a working hot rod. Don’t settle for lighter liquid or propane torches at the expense of flavor quality for grilled meats, smoked ribs, and other barbecue staples
  • > Guarantee and Service: The hot rod igniter element kit Replacement Part completed with a One-year Warranty. Save much money off dealer prices. If the igniter once failed on your pellet grills and smokers, simply contact us for a replacement or refund.

Click Here For More Information