Tag Archives: Ignitor

pellet grill

Elysiumstar Grill Hot Rod Ignitor Kit for Traeger Wood Pellet Grills, Replacement Parts for Traeger 070, 075, Texas Elite Series, Pro Series Includes Fuse

Hot Rod Ignitor Kit For Traeger
The item is used for wood pellet grill&fireplace igniter,with high tempereture,short heating time,long service life,low leakage current and other performance.
Specification:
Material: Steel
Size: 76*0.9cm/30*0.35inch(LXDia) Wire Length: 61cm/24inch Rod Size: 9.6*0.6cm/3.7*0.35inch(LXDia)
Package Includes:
1* Hot rod
1*Fuse

Product Features

  • Hot rod is coated with black oxide. It enhances corrosion protection and increase resistance to abrasion.
  • Compatible with all Traeger grill models except the PTG.
  • 220 Watts 120 Volts 24″ wire lead Molex quick connector.
  • Fuse included.
  • Installation: This igniter does not come with instructions. It must be connected to the purple connector on your Traeger. The igniter itself should be at max 1/4″ into the fire pot. Please have professional technician install it properly.

pellet grill

MONIBAQ Hot Rod Ignitor Kit for All Traeger Wood Pellet Grill Parts Replacement

MONIBAQ Hot Rod Ignitor Kit for All Traeger Wood Pellet Grill

【Fits Great 】– Fits all Traeger Wood Pellet Grill: Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More

【Better Design】– The wire is up to 30 inch long in total,  and the hot stick is 3.7 inch for better installing and using

【Durable】– Made of high density cartridge heating element, 200W/120V wire lead for longer service life

【Smoothly】– Ignites the hardwood, making starting your grill as simple as flipping a switc, have a better grilling experience

【Easy to Install】– Plug and play, take only about 10 minutes to replace

【Installation Tips】– For Best Performance, Set the new Hot Rod to protrude 1/8 to 1/4 inch into the fire pot

When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate like new again

You shoule have it immediately to open your long-awaited grilling season

Product Features

  • Fits all Traeger Wood Pellet Grill: Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More
  • The wire is up to 30 inch long in total, and the hot stick is 3.7 inch for better installing and using
  • Made of high density cartridge heating element, 200W/120V wire lead for longer service life
  • Ignites the hardwood, making starting your grill as simple as flipping a switc, have a better grilling experience
  • Plug and play, take only about 10 minutes to replace, and you will get you grill works like brand new again

rec tec grill

Stanbroil Replacement Hot Rod Ignitor Kit for Traeger Wood Pellet Grills

2 Comments


KEEP YOUR GRILL GOING ALL YEAR LONG: 3″ high density cartridge heating element replacement. An identical match to the OEM hot stick. Compatible with all Traeger grills except for their PTG model. When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively.

QUICK CONNECTING: 200 watt/120 volt, 24″ wire lead hot rod goes into the base of the firepot. Designed for a quick connection, once properly installed, reigniting your grill will be as simple as flipping a switch.

EASIEST WAY TO BBQ: A working hot rod does all the hard work for you — quickly lighting your wood and keeping the fire lit for quality grilling. Your grill simply won’t work without a functioning hot rod. Don’t settle for lighter fluid or propane torches that sacrifice the flavor quality of your grilled meats, smoked ribs, and other barbequed mainstays.

INSTALLATION TIP: Sometimes, the burnt out hot rod may be difficult to remove. Cutting off the end with a pair of diagonal pliers as swelling often occurs. Taping a wire onto the electrical connector before removal may also make the entire process go smoother. For best performance, only 1/8″ to ¼” of the wire should be visible once the replacement cartridge is in place.

Product Features

  • Located at bottom of firepot
  • Keep fire going, get delicious flavor with hardwood fuel
  • For proper installation, only 1/8-1/4 inch should be showing in firepot
  • Ignites the Hardwood, making starting your grill as simple as flipping a switch
  • Compatible with Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More, also fits for Pit Boss pellet grills (EXCEPT PTG)

rec tec grill

QuliMetal Grill Hot Rod Ignitor Kit Replacement Parts for Traeger Wood Pellet Grills

3 Comments

Product Features

  • Fits all Traeger wood pellet models: Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More
  • Located at bottom of firepot, Ignites the Hardwood, making starting your grill as simple as flipping a switch
  • Keep fire going, get delicious flavor with hardwood fuel
  • Notice: for proper installation, only 1/8-1/4 inch should be showing in firepot
  • Installation guide: https://youtu.be/HsbNKA1vgBA

rec tec grill

ZHOUWHJJ Replacement Hot Rod Ignitor Kit for Traeger Wood Pellet Grills

3 Comments

KEEP YOUR GRILL GOING ALL YEAR LONG: 3″ high density cartridge heating element replacement. An identical match to the OEM hot stick. Compatible with all Traeger grills except for their PTG model. When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively.
QUICK CONNECTING: 200 watt/120 volt, 24″ wire lead hot rod goes into the base of the firepot. Designed for a quick connection, once properly installed, reigniting your grill will be as simple as flipping a switch.
EASIEST WAY TO BBQ: A working hot rod does all the hard work for you — quickly lighting your wood and keeping the fire lit for quality grilling. Your grill simply won’t work without a functioning hot rod. Don’t settle for lighter fluid or propane torches that sacrifice the flavor quality of your grilled meats, smoked ribs, and other barbequed mainstays.
INSTALLATION TIP: Sometimes, the burnt out hot rod may be difficult to remove. Cutting off the end with a pair of diagonal pliers as swelling often occurs. Taping a wire onto the electrical connector before removal may also make the entire process go smoother. For best performance, only 1/8″ to 1/4″ of the wire should be visible once the replacement cartridge is in place.

Product Features

  • Located at bottom of firepot
  • Compatible with all Traeger grill mode (EXCEPT PTG),Traeger wood pellet models: Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series and More
  • Ignites the Hardwood, making starting your grill as simple as flipping a switch
  • Keep fire going, get delicious flavor with hardwood fuel
  • For proper installation, only 1/8-1/4 inch should be showing in firepot