Introducing our Exclusive Pellet Pro PID Pellet Grill Controller, we have set the new standard for outdoor barbecuing! With PID Autotuning Algorithm Technology, the controller allows you to set the temperature in 5° increments from 160°F-450°F, and maintains that temperature within 5°F or less! It reads the temperature every 4 sec and adjusts the speed of the fan and auger, resulting in accurate temperature maintenance. No matter the application or ambient outside temperature. Take your barbequing experience to the next level with the Pellet Pro° PID Controller. This controller also includes a 15min shut down cycle, meat probe connection (with meat probe), full LED display, and standby mode with manual pellet feed capability. With standard Moldex plastic connections, this exclusive PID Controller is compatible with any pellet grill that requires an auger motor, fan motor, electronic hot rod, and RTD temperature probe. **For best results, be sure to use a 0.48amp; 3000rpm Fan Motor and 0.4amp; 2rpm Auger Motor.** Smoke Daddy Inc. is not responsible for any misuse of the PID Controller that may cause damage to the customers’ grill or any other property. The custom mounting adapter plate is included; mounts directly to Traeger, Pit Boss, Camp Chef, etc… Upgrade your current pellet grill to a Pellet Pro and see and taste the difference! Required hole dimensions: 2.6″x3.9″, Face dimensions: 2.75″x4.75″. Power Requirements: 110V – 220V ±10%; 50-60hz. FREE SHIPPING within the Continental US. Warranty: We offer our 1-year warranty that if for some reason the controller malfunctions we will replace it with no charge. 30 day money back guarantee. Does not include misuse or neglectful usage. FREE Lifetime upgrades for firmware. If we have any firmware updates, send the controller back to us and we will update the firmware and send it back to you at NO COST! *The mounting hole must be at least 2-5/8″ wide on the hopper assembly for the PID Controller to be mounted*
Product Features
- PID Autotuning Algorithm Technology; Maintains set temperature within 5°F!
- Temperature range: 160°F-450°F in 5° Increments
- Predetermined Timed Smoke Setting & 15min Shutdown Cycle
- Meat Probe Included; Connects Directly to Controller for Convenient Temperature Reading
- Adapter Plate Included. Fits directly to Traeger, Pit Boss, Camp Chef, etc..
Click Here For More Information
Simply Amazing This controller is absolutely amazing! I just replaced the controller that came on my Traeger smoker, and the difference is night and day. Where the Traeger’s controller was rather “dumb” and tended toward 10 degree drops and up to 50 degree overshoots (YMMV) this thing holds rock steady within a +/- 5 degree band at worst (once it “learns” its current environment and settles in, which took about 10 – 15 minutes it seemed, at least in my case and with the weather I was having…
Worked fine, then a few weeks later Purchased this controller 8/2017 to replace the controller on my Traeger Pro 34 BBQ. I was interested in the PID technology. After installing a using it for a month, had a burn back in my auger. Took everything apart, & cleaned out the auger tube using a drill. Worked fine, then a few weeks later, did it again, this time blowing the auger motor. Ordered a replacement motor & auger through traeger, & reinstalled the digital pro controller that came with the BBQ. Used it for a few months,…
heaven of pellet grill controllers loving it so far. I followed the seasoning instructions and after a short period of startup time (around 5 to 10 minutes), the temperature (350F) held in at 350F +/- 1F. It is amazing. The smoke simply never stopped, and it was always blue (the holy grail of smokers). I always had issues with the controller supplied with my Tr***er, I recommend everyone with those grills/controllers to get rid of that horrible controller and replace it with this PID. The improvement is from hell to heaven. I…